- Joined
- July 9, 2001
- Messages
- 2,090
- Reaction score
- 0
- City, State
- Freeland, PA
- Year, Model & Trim Level
- 98 SAS X, 94 3000GT VR-4
OK, I'll get right into it.
my batter was going mostly dead for some time now if I didnt start it every day. Now, after it sits for a day I turn the key and it starts to act like the bat is dead but then starts to turn over at a normal speed but not start (after 6-8 sec.), second shot, it either turns over without starting or starts right up (if it doesnt start, it does on the 3rd try right away).
my thoughts:
Fuel pump relay getting stuck on (being that if left alone the battery will only drain down to 8-9v and stay there, not drain all the way dead) I'm thinking that once it gets to 9v, the relay cant energize anymore and opens the circuit.... so, what would keep the relay on? I doubt its the relay itself being that it opens after the bat is drained....
or
could it be something else? becides for running rich no other CEL codes up.
my batter was going mostly dead for some time now if I didnt start it every day. Now, after it sits for a day I turn the key and it starts to act like the bat is dead but then starts to turn over at a normal speed but not start (after 6-8 sec.), second shot, it either turns over without starting or starts right up (if it doesnt start, it does on the 3rd try right away).
my thoughts:
Fuel pump relay getting stuck on (being that if left alone the battery will only drain down to 8-9v and stay there, not drain all the way dead) I'm thinking that once it gets to 9v, the relay cant energize anymore and opens the circuit.... so, what would keep the relay on? I doubt its the relay itself being that it opens after the bat is drained....
or
could it be something else? becides for running rich no other CEL codes up.