Need Help finding a lift for my 98 sport

[Pauly034]

I have a 98 sport, 2wd, 5 speed manual. I currently have 31's on it which just required a little timming. I would like to lift it 3-4 inches. I was wondering where to find one or would a 98 Ranger 2wd lift work the same. Pleasehelp me out.

Thanks,

Paul Belmont
Maniac34@aol.com

 

[2001ExpSport]

Look up Fabtech, they make an inexpensive spindle drop kit for the 2wd. It's 3-4 inches I believe and you could also get a 3" 98-00 Ranger body lift for about $130. It all depends on what you want, suspension or body lift.

http://www.natltire.com/ntw0799/pages/fabtech10.html

Don't get confused, you vehicle will use drop brackets, not the coil springs and raduis arms.

Also look here:

Dead Link Removed

 

[BajaXplorer]

Those Ranger Spindles will NOT work on the Explorer. Bullseye who makes the spindles for Pro-Comp is the only ones who make a 3" 2WD spindle for the Explorer.

I heard Fabtech would make one but then they stated it would just be the Bullesye spindle painted blue(like all there other stuff)

 

[2001ExpSport]

Here is what you need.

http://www.explorerprocomp.com/2wdfordsystems.html

Scrool down to the bottom where it says 98-01 Explorers.

Not sure what Baja was talking about. Those pictures are Explorer Pro Comp, not Fabtech or Bullseye.

 

[BajaXplorer]

Bullseye makes ALL the spindles for Fabtech as well as ProComp.

Thats what I was talking about and yes the picture was of ProComp thats what I was trying to show him.

 

[2001ExpSport]

Ok, I gotcha now.