need more camber

[98svt]

after it was lowered 2 inches it was aligned and camber ajusters were installed....but the alignment shop told me that one side is maxed out and still isnt within specs....when i got my camber ajusters i got a set of four ajusters total....is that correct.....do i need four on each side??...and i didnt get any bolts with it....do i need them??...and for those who have lowered theres 2 inches do you think i should have enough ajustability with camber ajusters or should they not have a problem correcting it.....it isnt in the red very much at all but it is in the red....thanks for any help with this...

 

[james t]

there should be 2 cams per bolt, which would be 4 cams per side and 8 cams total. mine were very close to maxed out to get inspec camber with a 2" drop.

 

[98svt]

yeah thats what i thought.....there should be 8 total....thats what i get for not doing it myself.....my question now is can i go get 4 more ajusters and put them in and do i need bolts for them b/c the 4 currently in there now didnt come with bolts and where do i get them....back at the alignment shop or ford or parts store or what....thanks for the help....

 

[james t]

Napa and most other parts stores have them. im not sure if the stock bolts will work or not, because ive never seen stock ones. the bolt will have to be "D" shaped all the way from head to tip. i dont know if the stock one is or isnt.

 

[Fusion213]

On my explorer, the stock bolts already had the adjustable cam on them, all i needed to do was install just the cam itself on the other end of the bolt. So four new cams total for both sides.