dmac0923
Well-Known Member
- Joined
- August 10, 2006
- Messages
- 267
- Reaction score
- 0
- City, State
- Yorktown
- Year, Model & Trim Level
- 2002 ranger xlt
i tried posting in the tech section but my post didnt show up.
(01 sport)
i did a 4 wheel brake job and had to replace one rear caliper. bled the system with truck running properly several times. cant get a pedal. pedal is high and hard with the truck off. as soon as the engine is on, the pedal sinks right to the floor and the truck wants to stall
i tried it with the power booster plugged and the pedal seems normal. the vacuum hose from the manifold to the check valve looks good as new
is my booster bad?
(01 sport)
i did a 4 wheel brake job and had to replace one rear caliper. bled the system with truck running properly several times. cant get a pedal. pedal is high and hard with the truck off. as soon as the engine is on, the pedal sinks right to the floor and the truck wants to stall
i tried it with the power booster plugged and the pedal seems normal. the vacuum hose from the manifold to the check valve looks good as new
is my booster bad?