next g2g?

[Albino 94LTD]

I'll have all the tools currently in the back of my rig plus;
Cordless impact wrench & impact sockets
Cordless sawsall
Grinder w/ cuttoff wheels

(and of course the charger for the cordless tools)

What about jack & jack stands? I won't be needing them, anyone else?

 

[Diff Whack Daddy]

I need a sledge hammer and a short section of 2x4. I am going to pull the passenger door panel off the pony and try to reshape the outer door skin a little.

 

[Albino 94LTD]

I need a sledge hammer and a short section of 2x4. I am going to pull the passenger door panel off the pony and try to reshape the outer door skin a little.

I carry a 3lb but the 2x4 you have to borrow from Paul

 

[Diff Whack Daddy]

Yeah, I saw he had plenty holding up those 4x4's while the cement dried.

 

[tuanies]

Looks like I'll stop by for a little bit after sneaking away from packing . I'll bring a case of beer.

Anyone want to buy a 12" sub? I'll bring it if anyone's interested (Image Dynamics IDQ12v2 dual 2-ohm, brand new, $110).

 

[Paul]

I've got a jack and two stands, plus the highlift; no ramps, but don't think they're needed.

Kevin - I have a 10 lb. sledge (full size), a small 1.5 lb. hand hammer, rubber mallet, and plenty of wood.

Phil - May need to borrow the Sawzall - - need to french the back hatch for the license plate. . .

Tuanies - Thanks for bringing some beer, are you packing to move? Or unpacking because you've just gotten to the area?

Andy - If you don't mind, bring 5-6 of those two liter bottles (they're pretty cheap compared to 12 packs) in any variety, 2 of Coke, Diet Coke, Mountain Dew, 7 Up, etc., and one Dr. Pepper for Kevin, I've got cups, and grab some ice on the way in. . .

Paul

 

[tuanies]

I'm packing to move. Going from Puyallup to Graham. I grew up in Tacoma and graduated from Foss.

 

[Paul]

Got to use the Hi-Lift!

Should have waited till you guys showed up for this effort - - 10' 4x4's, sunk to 36" with concrete. . . SUCK!

Kevin - - there's the 10 lb. sledge to the right, small hand-held to the left. . . Ought to be sufficient to bang out some dents in the BII...

Don't worry, I won't have any house projects for you guys (except Phil) come Saturday. . .

Paul

 

[Albino 94LTD]

Is your winch broke AGAIN? :

 

[waexplorerJR]

Hey I am planning on coming to the BBQ. I am the guy that is purchasing Kevin's BII. My name is Nick, I've had a 91 explorer 2DR 5 Speed, lifted, locked, 4.56 gears etc. I've owned a few toyota's and most recently a Samurai with toyota axles, toy power steering, 6.5:1 Tcase gears, Yj' springs with missing links etc that I built with a plasma and welder, right down to the shackles and dom for the steering. I look forward to meeting you guys. I have wheeled evans with some of you back in 04 but I was alot younger and doubt I will remember anyone. What should I bring?

 

[AE86PandaDude]

can someone pm me the address and/or directions since i do not feel like spending all Saturday doing a 20 mile hike on a railroad grade trail.

 

[jrgaylor]

Hey I am planning on coming to the BBQ. I am the guy that is purchasing Kevin's BII. My name is Nick, I've had a 91 explorer 2DR 5 Speed, lifted, locked, 4.56 gears etc. I've owned a few toyota's and most recently a Samurai with toyota axles, toy power steering, 6.5:1 Tcase gears, Yj' springs with missing links etc that I built with a plasma and welder, right down to the shackles and dom for the steering. I look forward to meeting you guys. I have wheeled evans with some of you back in 04 but I was alot younger and doubt I will remember anyone. What should I bring?

I meet you at the 410 cafe whenther was a run to evans creek, I never saw you after the cafe

 

[Paul]

Is your winch broke AGAIN? :

What? That's crazy talk... The winch is fine - - just didn't want to build an "A" frame or make a 20' trench from a dead pull. . .

Nick - Look forward to meeting you. I'll PM the address, and if you pick up a couple bags of chips and some salsa or dip that would be great. . .

Do we need to alter the link-up time? Only asking since Josh wouldn't be able to get here until 6:00 p.m. - - no problem extending the BBQ to include dinner (just more burgers and dogs), so we can go from 11:00ish to 8:00 or 9:00 p.m. (or later), or would you guys prefer to meet up instead at like 1:00 or 2:00 in the afternoon? Obviously, there are no "hard" times, fine with me if guys just filter in and out as the weekend schedule requires. I'll be plugging away at some of my projects from about 9:00 a.m. on, so it'd be pretty hard to show up too early. . .

Thoughts?

Paul

 

[Paul]

Additional address PMs sent out to Nick and Chris. . .

Joe - Any chance you can come on up?

Paul

 

[Diff Whack Daddy]

I won't be there until about 1 or 2. There is my 2 cents

 

[waexplorerJR]

I plan to arrive at 1-2 as well to meet up with Kevin. Wifey wheels with me, she wants to see what I'm buyin and we don't have a sitter so I may need to bring my boy with me if that's cool. We should be able to hang around for at least a couple hours Chips and salsa it is.. ( I will be trying to make arrangements to have a family member watch the kid )

 

[Spdrcer34]

Hmm...what to bring....I think I will bring the White `92....you guys haven't seen it since I did the 5.0L &`97 dash swap

Ryan

 

[tuanies]

I'd love to see that. I'll see if I can hijack the fiancee's Explorer, but seeing as how she can't drive stick, I might have to drive my own car.

 

[Albino 94LTD]

I might have to drive my own car.

You'll be relegated to the alley

Better bring the X and her too.

 

[jrgaylor]

Additional address PMs sent out to Nick and Chris. . .

Joe - Any chance you can come on up?

Paul

Maybe, but don't count on it. I am running short on time and there is a few things I want to try get done to Bronco. I want to make a new trac bar, change a lower ball joint and refresh the paint. The last trip down the Busy Wild gave me manyl new dents and I needed a new door.