No Power for Lo-Beam Headlight

[bonesy]

Just the other day I noticed that my driver side headlight was not working and I replaced the bulbs. However with the new bulbs the lo-beam still was not working. I pulled out the voltmeter and the lo-beam wire was providing no power. How can I reestablish power in driver side low beam wire?

Is there a separate fuse or a relay (position?) that I can check for a loose fitting?

Thanks.

 

[budwich]

you have a LOM problem. Lots of posts... some bypass some fix... take your pick.

 

[firepop5]

LOM = Lamp Out Module. It's in the center console.

 

[bonesy]

wow. that was one of the easiest repairs i have made to date. Removed the LOM, resoldered the infamous pin (i believe pin 10 on the connector), plugged it back in a worked. repair time 5 mins.

thank you. thank you for your guidance.

 

[firepop5]

and you saved $70 for the part, plus labor !