not new to RBV's but looking for a sport trac

[cdawall]

Well my family has expanded and it turns out a Ranger is just not big enough for 3 . My current truck is SAS'd with a low pinion D30 out of an XJ using XJ coils and a parallel 4 link. i would love to find a cheap sport trac to do the same with. will be running a SOA conversion in the back probably going to use the stock L/S unit for the time being run 4.10s and hopefully a D30 HP EB D44s are a pain to come by in SD.

Here are some photos of it flexed and not.

rear is off the ground and the factory traklok sucks

front tucked and a snapped panhard bolt...trail fixed i now carry spares

quite a bit of travel

you can see the LCA's

no blocks factory shackle thats all leaf

need a little stiffer of a coil if i want to lift anymore...

coil buckets/shock towers

 

[Willcall]

Welcome to this forum! There are many Explorers (and a Sport Trac or two) here that have been SAS'd. Just do a search on almost anything and you will find tons of info.

Nice Ranger!

 

[cdawall]

Been reading through one of the sas threads on the sport trac but I don't want to go with a leaf sprung front. I would prefer to do a full 4 link again since the ride is quite nice.

 

[Sams01XplrSprt]

welcome

 

[Glen4X4]

Welcome To The Forum, sounds like a good plan. Nice Ranger.

 

[1Aauto]

welcome to the site

 

[cdawall]

thanks if i get this expo all together and it ride nice like the ranger i will have a kit for SAS'ing them with a D30 if anyone is interested.

 

[Glen4X4]

thanks if i get this expo all together and it ride nice like the ranger i will have a kit for SAS'ing them with a D30 if anyone is interested.

We've heard that in the past. Would be nice if you're one of the ones that stick with it, there's quite a few that would love to buy a kit.

 

[BrooklynBay]

Welcome to this forum!

 

[cdawall]

We've heard that in the past. Would be nice if you're one of the ones that stick with it, there's quite a few that would love to buy a kit.

Been looking at helping get one together for a little bit now

 

[Glen4X4]

Been looking at helping get one together for a little bit now

That would be nice

 

[alfred rich]

welcome to the forum. kickass plan i must say.. a unique one..