Oil Filter Thread Size

[kabukie]

before someone says search... I already look for about 30min.

What size threads are on the oil filter? I would like to put on a oil filter sender adapter so that I can install a oil pressure guage. http://www.glowshiftdirect.com/index.asp?PageAction=VIEWCATS&Category=37 But in order to do so I need to know the thread size

 

[dkchrist]

not exactly what you want to hear but do a search for sevice manual. somewhere on this site is a link to download the service manual for ford trucks. try that it would probably be your best bet

 

[kabukie]

bump!! the manufacture of the oil filter adapter claims it is a m20-p1.5 can anyone support what they are telling me? Id hate to buy it try to install it and it doesnt fit.

 

[shamaal]

Go to an autostore and see if a M20-p1.5 bolt screws into a filter hole. Or take a filter to a hardware store. On my '91 the oil filter fitting is a nipple, i.e., the same thread sizes for the vehicle and the filter.

 

[kabukie]

after a bunch of searching around.... Ive found 2 answers either 22m 1.5p or 3/4in-16
anyone else care to throw in another size?

 

[Midnight coal company]

after a bunch of searching around.... Ive found 2 answers either 22m 1.5p or 3/4in-16
anyone else care to throw in another size?

Not 3/4

 

[Midnight coal company]

after a bunch of searching around.... Ive found 2 answers either 22m 1.5p or 3/4in-16
anyone else care to throw in another size?

I tried a 3/4 an no go.also m20 1.5. I'm in same boat. Trying to find someone in Australia that has em. Found one shop autobarn. Says it's this part number from saas. Sff2215. It's all ive found out so far.

 

[swshawaii]

2006 thread.

If the engine uses the Motorcraft FL-820S filter, it's M22 x 1.5. Same size as the timing chain hydraulic tensioners.

 

[Fordtruckfan89]

I just installed a oil pressure gauge on my 03 trac, used a 1/4 npt tee to keep the original gauge and the additional sender working.