Ok... Need some help.

[BF]

A buddy of mine has a sport trac, and has some 22's for it. Well i'm a little to country for that, but would love to put them in some 35's seeing as how i'll get the rims for dirt cheap from him. I found the tires i want, Super Swamper 35x12.50x22's and the set will run me about $1300. So what is the cheapest way to achieve the lift i need to fit these. Obviously spending that on just tires, i cannot afford a suspension lift. Body lift and TT/Shackles? Or will i need something else? HELP!!!

-Blake

 

[Blee1099]

all of the above and lots of trimming

 

[BF]

So simply getting a body lift along with warrior shackles and cranking my torsion bars with get the lift i need? what about spacers?

 

[Makahveli]

Wow, so your doing the opposite of me. I was all set for 35's gears and all, but decided to go to 33's on 22's and getting rid of the bodylift. Good luch as the newer explorers give you more room than I had to work with.

 

[Blee1099]

So simply getting a body lift along with warrior shackles and cranking my torsion bars with get the lift i need? what about spacers?

What kind of spacers? The only thing you can do the front is a RCD 5", 4" suspension, body lift, TT.. Rear is pretty limited to, you can do a SOA which is about 5" of lift, the body lift, shackles & AAL which may give you 1.5" Johnstone has a sportrac with a body lift & TT & shackles plus fiberglass fenders to fit 35s, w/o the fiberglass fenders he would need some trimming. Take a look at rigs like GJarrett, Doug, BenS, etc..