ATC Enterprises
Member
- Joined
- April 28, 2001
- Messages
- 35
- Reaction score
- 0
- City, State
- Fairmount, Indiana
- Year, Model & Trim Level
- '91 Eddie Bauer
Here is a small pic of what the 91 EB looked like before we started working on it....
When Wildside had it, he put new rims and tires on it (a little smallish for my tastes). He also put a used liftgate on, but never got it adjusted right. Then he replaced the ignition keyset and all the fuses to get it running.
When I got it, I went to town. So far I have...
1. Changed the oil, filter and antifreeze.
2. Changed the plugs and wires, air filter and PCV.
3. Installed new battery and terminals.
4. New rotors, bearings and brake pads on the front.
5. New drums and shoes on the rear (almost done anyway).
6. Installed Warn locking hubs.
7. Put the dash back together, replacing all the stolen parts (light switches, heater controls, ash tray, steering wheel, bezel)
8. Installed better condition seats (they're EB's even).
9. Installed overhead console and updated dome light.
10 Installed Pioneer CD head unit.
I've also done numerous little things like wiper blades and replacement of various lights and such. Oh, and new rear shocks because the salvage company damaged them with the fork truck.
I'll be finishing up the rear brakes and the remainder of the fluid changes in the next couple of days. All I have to do is figure out what to do next. Maybe some new speakers, Infinity perhaps.
When Wildside had it, he put new rims and tires on it (a little smallish for my tastes). He also put a used liftgate on, but never got it adjusted right. Then he replaced the ignition keyset and all the fuses to get it running.
When I got it, I went to town. So far I have...
1. Changed the oil, filter and antifreeze.
2. Changed the plugs and wires, air filter and PCV.
3. Installed new battery and terminals.
4. New rotors, bearings and brake pads on the front.
5. New drums and shoes on the rear (almost done anyway).
6. Installed Warn locking hubs.
7. Put the dash back together, replacing all the stolen parts (light switches, heater controls, ash tray, steering wheel, bezel)
8. Installed better condition seats (they're EB's even).
9. Installed overhead console and updated dome light.
10 Installed Pioneer CD head unit.
I've also done numerous little things like wiper blades and replacement of various lights and such. Oh, and new rear shocks because the salvage company damaged them with the fork truck.
I'll be finishing up the rear brakes and the remainder of the fluid changes in the next couple of days. All I have to do is figure out what to do next. Maybe some new speakers, Infinity perhaps.
