Parts Diagrams

[rogueexplorer1]

Been looking everywhere for a parts diagram site. Anyone have a link to one?

Looking for the transfer case sensor on the back of the case. It's leaking and looks like I need to nuiy the whole sensor as the o ring is flat and won't come out without damaging it.

 

[rasouth]

I did a quick look on Google for a 98 explorer trans case diagram and quite a few diagrams came up. What sensor are you concerned about? I think there are 2 sensors: speed sensor and a shift positioner sensor.

 

[J_C]

There's this, and this.

How to: - The Borg Warner 4405 Transfer Case Rebuild Diary

I am going to try and put this entire thread together much as I did the 4R70W Diary, so those just needing basic info do not have to sift through a lot of chatter throughout the thread. I will create and link another comment thread for those comments - which is here...

www.explorerforum.com

.

 

[rogueexplorer1]

Thanks. After searching a little more from your pics, it looks like its a rear auto output shaft speed sensor. Tried to attach a pic but can't. The one on mine is flat, which made me think it was a special oring, but maybe I can just take the old one off and match a new oring that seals it. For the time being, i put a small bead of black permatex on it to stop the leak, but the wire coming out of the sensor has a tiny bit of exposed wire where it comes out of the sensor. Probably deteriorated from fluid leaking on it. I drives fine, but don't wanna take a chance.