Performance chip installation

[DMJochimsen]

I purchased a performance chip. I am not that technical, and the installation instructions leave a lot to be desired. Has anyone ever installed one of these, and know which two wires to tap into on the 6 wire IAT MAF sensor?

 

[BIGHVM]

NOt sure what model you have- but as it taps to maf- it must just make the maf think air temp is colder than it is- so you will have a richer mix and so burn more gas, maybe go a bit faster also.
You would be better off with an upgrade air filter, a clean maf, and 97 ron fuel, if you get it there mate.
Then you would have more air intake better air temp read and better octane.....proper way to do it.
Those things may well fry your ecu in time- I would not wire it in!
Good luck mate.

 

[BrooklynBay]

Welcome to this forum! Don't install it. It's only an expensive resistor, and not a computer chip.

 

[celly]

ACK! Don't install it. Please tell me you didn't get suckered into one of those eBay chips that promise so much and deliver little. Take if back (if you can) then research real tuning options for your truck.