Photo of underside of my Explorer???

[jay3253]

This is by no means a good photo and I wanted to know if anybody has a better one. I would like one good enough to take measurement from.
http://picasaweb.google.com/jasonp3253/MyPictures#5409045147312344626

 

[ThePhoenix]

interesting photo...how high was the truck to get the full under carriage?

 

[Danson]

i have these, they are from a 1996 Limited

http://s835.photobucket.com/albums/zz279/Danson1391/?action=view&current=DSCF2421.jpg

http://s835.photobucket.com/albums/zz279/Danson1391/?action=view&current=DSCF2420.jpg

The Rear doesent look that good, but the front one isnt bad

 

[jay3253]

interesting photo...how high was the truck to get the full under carriage?

About 8ft but I had to stitch it together as I didn't have a wide enough lens to get the whole thing. I will try to take it again with another camera my wide is only 50mm and I need 28mm. I will keep trying but the link Danson sent looks promising. I should have used my flash but my batteries were almost dead too. Thanks

 

[98ExplorerMan]

I'm curious, what are you measuring?

 

[jay3253]

I'm curious, what are you measuring?

Well for now nothing but I would like to be able to change the location of the rear shock mounts and would like a clear picture that will get me close. I have all the tools I would need to do the job but would like to go into this knowing where I am and what needs to be done. Also if I would ever do an SAS or a 4 link I would like to see what needs to be removed etc. just a few ideas but I think it would help others with their projects also.