Project X: Rear Wing Spoiler

[Makahveli]

About how much did this run u about, or the deflector?

 

[IAmTodd]

Primer is just proof that it is work in progress. No reason to be ashamed

 

[X~FACTOR]

Makahveli- the cost of the wing itself is about $180 plus another $20-$30 for the fiberglass, putty, and lots of primer paint rattle cans.

Todd- I used to have that old Camaro where I did all the body work on. For the 10 years I had it, more than half the time it was in primer paint. I promised myself my next vehicle wouldn't go through the same thing but here I am again with a primered truck.

But I do agree with you and Hartman, primer just means its in working progress.

 

[IAmTodd]

Just as long as you don't leave any fiberglass parts white for a long period. Then, and only then, will I call you a RICER!!

 

[X~FACTOR]

Hehe... agreed.

 

[Makahveli]

Idon't gethow u connected those pipes inside the wing

 

[Black Magic]

I looked to me like they were screwed as well as Glassed in. I could be wrong

 

[X~FACTOR]

They were riveted in placed (4 per tube). I then shaved off the head just enough to make it blend in when I slap on more fiberglass. That part was quite easy.

 

[Black Magic]

Well, I was close! LOL