Question about fog lights.

[MtlExp]

Hey guys,

I bought some fog lights for my truck (4 square ones)

Question is ....

I wanted to put them on the front bumper between the headlights,truck does not have a push bar so it would be direct on the bumper thing is truck is really clean and I aint sure I want to make holes on the bumper..

Or

Can I install them on the stock roof rack ? Isn't it too much distance from the front ?

HELP.

 

[chris12491]

i put mine on the roof rack. it was a bit of a pain to do it, but it looked good when it was done. you have to use 8g power wire to run up to the roof.

you can take off the bumper and make the holes. make sure you space them apart right. if you take your time doing it, it will end up looking clean and good. it would be alot easier to put them on the bumper and run the wires from there.

 

[MtlExp]

i put mine on the roof rack. it was a bit of a pain to do it, but it looked good when it was done. you have to use 8g power wire to run up to the roof.

you can take off the bumper and make the holes. make sure you space them apart right. if you take your time doing it, it will end up looking clean and good. it would be alot easier to put them on the bumper and run the wires from there.

That's what I was thinking too..

Anyway way to do it without taking off the bumper ?

 

[chris12491]

hmmm.... you may be able to just drill the holes and put in the nuts from underneath. but its gonna require a little patience. the bumpers not too hard to remove. that takes time too thou. i did mine with 2 wrenches. just be careful the bumper doesnt drop down on you. it hapeened to me.