Rear lower than front | Ford Explorer Forums

  • Register Today It's free!

Rear lower than front

Zim

Member
Joined
August 31, 1999
Messages
37
Reaction score
0
Year, Model & Trim Level
1997
The rear springs on my Explorer are starting to sag down. I am planning on picking up a pair of Warrior shackles to bring it up to the right height. I've measured from the ground to the top of the wheel well and the back is 1 inch lower than the front. Does this sound like the right action to take to fix the problem. I don't want an add a leaf because I like the ride the way it is now. Don't want is any stiffer. Thanks for any advise.

------------------
Zim
92 XLT 4X4 4.0L
Rancho RS 9000s
Modified Air Box
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





I am starting to experience the same problem with my explorer. (98 Sport). It seems like it started happening after I put the thicker rear sway bar on from Explorer Express. I was hoping that when I put some new shocks on (edlebrock IAS) that it would take care of the problem. Lemme know if the springs work for you.....
 






My exploer is also starting to sag. I was thinking about putting new shocks on mine, being that they are still stock. Do you guys know if that will help? I was looking at putting on some bilsteins.
This is quite annoying to me. Here I am talking about how 4runners always start to sag in the back and here goes mine starting to sag!
 






Front wheel wells usually come higher than the rear ones to allow clearance for wheel travel while steering. Take a look to some other trucks and you'll note that - it doesn't mean that your trucks rear suspension is sagging. A shackle lift is fine if you're happy with your trucks ride. If not, you can go for an add a leaf, helper springs, air bags, or a new set of springs.
As far as I know, a new set shock absorbers won't offer any lift, unless they are of the air lift variety (the ones you put compressed air in - I don't know the right name for those). Also, an aftermarket antisway bar only offers increased body roll resistance, but (same as shock absorbers) has nothing to do with a sagging rear end.

Hope this helps you.
 






Mando is exactly right on the shocks. I replaced my stock shocks with RS 9000s a few months ago and it didn't help the sagging one bit. I will say it helped the ride of my truck a lot. No matter what you do for the sagging rear end get some quality shocks too. You won't be sorry.

------------------
Zim
92 XLT 4X4 4.0L
Rancho RS 9000s
Modified Air Box
 






Featured Content

Back
Top