remote entry problem help please

[BrandonB8]

I am wondering if anyone can help me with a problem I am having with my '95 explorer. My brake warning light came on yesterday mysteriously. It ended up being because of low brake fluid. I disconnected the battery for fifteen minutes hoping it would reset the sensor. When I hooked the battery back up my keyless entry doesn't work or the keypad or the autolock feature. I tried to enter programming mode using the Off-Run 5 or 8 times trick. This did not work. Has this happened to anyone else upon disconnecting the battery. Any help is appreciated. Thank you..

 

[BrandonB8]

Just wanted to post explaining the procedure that fixed this problem. I unplugged the module in the driver's side rear compartment. I then disconnected the battery. I reconnected the battery and then plugged the module's connectors back in. The alarm started going off so I entered my code into the keypad. The alarm shut off and the keyless entry and keypad started working again. I hope this helps someone in the future.

 

[FrankX570]

you are king BrandonB8, it worked like a charm...

finally keyless entry back in full swing, after almost 6 months...