Removing Stock Changer?

[XLT_66]

Hey, well i am trying to sell my stock headunit and changer on this forum and i was asked if i still had the wiring harness from the unit. The changer was never removed from the car, and i am pretty sure that it can't be used wit my headunit. My question is , if i have never removed the changer, does that mean that if i take it out, i will still have the wiring to connect it back to the origonal headunit. I "helped" install the new one, but i don't reallyknow how it is in there. I just need to know if i still have the "wiring harness" or not. How do i check to see if i still do?

 

[taxx]

OK, a little confuesed but I think I know what you are saying...

You removed the factory HU and you want to remove the changer to sell and you want to make sure you have all the parts? Well, the changer is easy to remove, just a few screws and some pulling. As for hte wiring harness, good luck. This harness is still there, however it is tied in with a bunch of other wires (back seat controlls). The buyer is better off going to Ford and buying the wiring harness.

 

[hhazz]

how much for the changer?