jwyder
New Member
- Joined
- December 6, 2001
- Messages
- 5
- Reaction score
- 0
- City, State
- Oak Park IL
- Year, Model & Trim Level
- '95 XLT
I have a 1995 XLT 4x4
I want to replace my front bushings due to a squeak in the driver side upper and lower arms where they attach to the frame. I have some questions:
1) How hard is it to replace the bushings on both the upper and lower arms?
2) Do I have to worry about the Torsion bar?
3) If I place new Daystar bushings on just the driver side will I need to replace them on the passenger side also?
4) How hard and long would it take me to do a complete front end bushing replacement?
All help is appreciated
I want to replace my front bushings due to a squeak in the driver side upper and lower arms where they attach to the frame. I have some questions:
1) How hard is it to replace the bushings on both the upper and lower arms?
2) Do I have to worry about the Torsion bar?
3) If I place new Daystar bushings on just the driver side will I need to replace them on the passenger side also?
4) How hard and long would it take me to do a complete front end bushing replacement?
All help is appreciated
