Georgie
Well-Known Member
- Joined
- June 3, 2006
- Messages
- 109
- Reaction score
- 1
- City, State
- montreal canada
- Year, Model & Trim Level
- 99 XL
Hi guys, was driving this morning to work, and when I arrived, I put my car in revers and gunned it to about 3000rpm. I know I'm stupid for doing it...anyways
it reversed normally and then i hit the brakes to stop. when i let go of the brakes to keep backing up it wouldn't move...Id give it gas and it would just rev like it was in neutral.
Driving forward has no problems, 4hi and 4low work fine.
I'm not sure what tranny I have, but the car is a 99 with a sohc. the 4x4 dial in the cabin has auto/4hi/4low.
What can i do to diagnose the problem??
Thanks guys!
it reversed normally and then i hit the brakes to stop. when i let go of the brakes to keep backing up it wouldn't move...Id give it gas and it would just rev like it was in neutral.
Driving forward has no problems, 4hi and 4low work fine.
I'm not sure what tranny I have, but the car is a 99 with a sohc. the 4x4 dial in the cabin has auto/4hi/4low.
What can i do to diagnose the problem??
Thanks guys!