Rotors manual hub vs auto hub

[yipchoy]

Hey new here so hope this is the right spot. This may also be a very dumb question but im learning here.
I have a 94 explorer with manual hubs and bad wheel bearings. And also have a 91 parts car with auto hubs and good bearings.

Can i just swap the rotors right over? And is there anything else i need to know other than the different sockets for removing the diferent hubs?

Thanks!

 

[DaSovietPotato]

Yes, IIRC the axle splines and bearings are exactly the same.

 

[yipchoy]

Yes, IIRC the axle splines and bearings are exactly the same.

Thank you!

 

[Brian1]

The difference will be the 93/94 will have the tone ring on the inside for the ABS brakes. The 91 will not have it. It might be able to be pressed off the old rotor/hub and pressed on the 91 rotor/hub but I'm not sure on that.