Ozz1967
Active Member
- Joined
- August 3, 2014
- Messages
- 81
- Reaction score
- 0
- City, State
- St. Cloud, MN
- Year, Model & Trim Level
- 1997 Explorer XLT
My truck runs pretty well for 190K miles. 97 5.0 AWD
The issue I am having is that the truck seems to lug/buck a bit at low RPM ( under 2K rpm) when accelerating.
The truck has 1yr old cap/rotor, plugs, plug wires and fuel filter.
The trans fluid has never been replaced since I've owned it but still looks fairly pink. It doesn't smell burned.
Also from 30mph - 40 mph, it seems to be rough (I can feel it in the floor boards). I recently replaced my front prop shaft (I ran without one for about 2 years) to get my AWD back because I moved back to a state with snow and I don't know if if this vibration is due to the new prop shaft, the fact I"m not used to how it feels after 2 years of running without one, or some other issue (front diff bad?)
Any thoughts and imput are welcome. Th anks!
The issue I am having is that the truck seems to lug/buck a bit at low RPM ( under 2K rpm) when accelerating.
The truck has 1yr old cap/rotor, plugs, plug wires and fuel filter.
The trans fluid has never been replaced since I've owned it but still looks fairly pink. It doesn't smell burned.
Also from 30mph - 40 mph, it seems to be rough (I can feel it in the floor boards). I recently replaced my front prop shaft (I ran without one for about 2 years) to get my AWD back because I moved back to a state with snow and I don't know if if this vibration is due to the new prop shaft, the fact I"m not used to how it feels after 2 years of running without one, or some other issue (front diff bad?)
Any thoughts and imput are welcome. Th anks!