guykickinit
Member
- Joined
- October 7, 2013
- Messages
- 12
- Reaction score
- 3
- City, State
- Redmond, OR
- Year, Model & Trim Level
- 1994 Explorer XLT
1994 Explorer XLT v6 4.0 auto
Im thinking this is a replace all the sensors and ECM or PCM issue.
All of a sudden, it's running at the top of the coolant temp range, pings under a load, idles at 1200-1300, and shudders horribly on startup.
It had done the shuddering thing in the past but it was intermittent.
None of the sensors have been changed and are all oem. It has 184k miles, so I think it time.
I figure I should get some engine code from the control module but it remains silent on the issue. NO CODES.
SO, gonna spray some WD on the o2 sensor, jump in another car and hit the parts store.
Thanks
Robert
Im thinking this is a replace all the sensors and ECM or PCM issue.
All of a sudden, it's running at the top of the coolant temp range, pings under a load, idles at 1200-1300, and shudders horribly on startup.
It had done the shuddering thing in the past but it was intermittent.
None of the sensors have been changed and are all oem. It has 184k miles, so I think it time.
I figure I should get some engine code from the control module but it remains silent on the issue. NO CODES.
SO, gonna spray some WD on the o2 sensor, jump in another car and hit the parts store.
Thanks
Robert