Shark Fin Antenna

[Justyman87]

I know there have been many threads on the topic and I understand most get it through Visual Garage. My question is what did you choose since I can’t seem to find a Ford option to choose the Explorer?

 

[cnsheets]

You just send them an email, include the paint code, and they will send you a paypal invoice to complete the order.

 

[Justyman87]

You just send them an email, include the paint code, and they will send you a paypal invoice to complete the order.

I see. They don’t have the options so you must request it. Does anyone know how much it coast and was the install as easy as they said?

 

[Javelin62]

I see. They don’t have the options so you must request it. Does anyone know how much it coast and was the install as easy as they said?

Search the other Shark Fin threads and you will find what you want to know

 

[Justyman87]

Search the other Shark Fin threads and you will find what you want to know

I already did. Sent them an email requesting a price and will buy it from there. Can’t wait to install it!

 

[cnsheets]

Mine was $69 plus $12 shipping. And yes, it was rather easy to install. I test fit and test aligned it first. Once I got it where I wanted it, I used some blue painters tape to mark it out. After making the connection and removing the backing on the foam tape, i used the tape lines to guide it gently into place. Be careful and take it slow, the stuff sticks quick and hard. After it was in place, I removed the painters tape. Took me about 15 minutes being very careful and setting it up with the tape for alignment.

 

[Justyman87]

Mine was $69 plus $12 shipping. And yes, it was rather easy to install. I test fit and test aligned it first. Once I got it where I wanted it, I used some blue painters tape to mark it out. After making the connection and removing the backing on the foam tape, i used the tape lines to guide it gently into place. Be careful and take it slow, the stuff sticks quick and hard. After it was in place, I removed the painters tape. Took me about 15 minutes being very careful and setting it up with the tape for alignment.

Thanks. I think I saw someone else on here had a thread showing pictures which i’ll follow. My next project after this one is getting red and black break calipers.

 

[VinceL]

Peter? Are you here?