kj4kym
Active Member
- Joined
- August 17, 2009
- Messages
- 51
- Reaction score
- 0
- City, State
- Kingsport Tn
- Year, Model & Trim Level
- 96 XLT Control Trac 4WD
well first off its a 96 ex 4.0 v6 4x4. When i bought it used not left nor right signals work and when i tried the hazards the right side would come one a hang on and wouldnt blink. so i drove it like this for a while and then my window was sprayer quit working too so i figured that the mf switch was going bad so i bought and new one and replaced it today. well i really hoped that this would fix my problems but all it did was make the right turn signal work and it works fine. but the hazards still hang on the right and the left still doesnt work at all. so i tried replaceing the flasher under the dash but still did the same thing. so i searched under the hood and i found a bunch of relays or something in a box beside the battery and i pulled all of them out but the right turn signal worked even with the all of the relays of flashers out that are beside the battery and all it does is stop the clicking noise when the signal is on. but other then that im pretty much at a loss for what else so check. also ive already checked all the bulbs and fuses and there all fine so i just idk
