signals dont work

[Roadhog#1]

hey people, I have a 98 explorer with an after market audiovox alarm its wired in to two flashers .one is for signals this one stops working after sitting thru one left or right stoplight turn. any fixes out there? fourways work fine.

 

[Rick]

Have you checked for burned out bulbs? A burned out bulb will not allow the signal to flash.

If that's not it you need to start troubleshooting. Swap relays and see if the problem continues.

If it's not the relay you need to figure out where in the system you're losing voltage.

 

[DjDom]

Or it's the multifunction switch.
The switch to turn the signals on itself, is known to fail in Second Gen. Explorers.