Spark plug wires?

[thorsteinarg]

Been searching for some time for suitible wires for my build, but it seems that there is not much to choose from. What I am searching for are wires better than stock, can resist more heat than stock is a must, and have a 45-90* bend is also a must since GTP heads. All the wires other than stock I find do not have the clips required for the dual coil pack ignition, only for a distributor like in the mustang for example.
Any ideas or links are greatly appreciated

 

[vroomzoomboom]

i have a set of moroso wires (cut to fit) from a chevy 454 from summit on my truck and used the coil clips from this place

http://www.kingsbornewires.com/ProductDetails.asp?ProductCode=S-1731

http://www.kingsbornewires.com/ProductDetails.asp?ProductCode=DT7B-HB

there is also some good info on this thread

http://www.explorerforum.com/forums/showthread.php?t=403903&highlight=plug+wires

 

[thorsteinarg]

i have a set of moroso wires (cut to fit) from a chevy 454 from summit on my truck and used the coil clips from this place

http://www.kingsbornewires.com/ProductDetails.asp?ProductCode=S-1731

http://www.kingsbornewires.com/ProductDetails.asp?ProductCode=DT7B-HB

there is also some good info on this thread

http://www.explorerforum.com/forums/showthread.php?t=403903&highlight=plug+wires

Thanks for the info I do have a set of livewires with a bend on the end and heat proof, could I cut the ends of and replace them with a clip on end? Would I need both items? Brass thingy and the clip on end?

 

[vroomzoomboom]

yup. you will need the brass, boots and clips