speaker installation

[Retardriot427]

i got a 1993 ford explorer Eddie Bauer, im trying to install some new speakers i got but i dont know how to take the covers/grill off, so i can put the new speakers in.
could someone help me with that. thanks

 

[Retardriot427]

if door panel removal in NECCESARY then could someone tell me how to do that?
thanks

 

[aldive]

Originally posted by Retardriot427
i got a 1993 ford explorer Eddie Bauer, im trying to install some new speakers i got but i dont know how to take the covers/grill off, so i can put the new speakers in.
could someone help me with that. thanks

Take a lot at Dead Link Removed

Good luck.....

 

[VBVA]

Door Panels How To...

I know it says to use a flat head screw driver and feel around for the snaps and then pop them off, but I just used brute force to rip the panel away from the door. This seemed to work and I don't think I damaged anything. Take a pair of plyers and pull all the snaps out of the door and then slide them into their cradles on the panel when they are ready to go back on. This will make popping the panels back onto the doors a whole lot easier. Just make sure you have proper clearance between your new speakers and the door panels before they go back on the doors. Good Luck!

 

[Retardriot427]

when doing this i would like to make sure i dont bring any harm to the door, such as...after putting the panel back on, the door is all loose and stuff, will using those methods do that?

 

[Crankcase]

Originally posted by Retardriot427
when doing this i would like to make sure i dont bring any harm to the door, such as...after putting the panel back on, the door is all loose and stuff, will using those methods do that?

It will be fine if you don't break any of the little snap plugs. I fyou bend one, just bend it straight, and it will work fine.

It is ALOT easier to remove/replace the door panel with the lock knob unscrewed, and taken out.