Superlift and RCD owners I've got a question for you

[kert0307]

Can someone measure the hight of the RCD spindle vs. the Superlift spindle. Since the RCD is advertised as a 5in kit, I am wondering if the spindle will be a little taller in the RCD kit than the Superlift 4in kit.

Thanks in advance,

Kurtis

 

[dkchrist]

when i get home i will measure the spindle of an rcd unless someone beats me too it

 

[kert0307]

ttt

 

[MountaineerGreen]

I can measure the superlift- you want from the top of the knuckle to the bottom where the ball joint goes through I suppose?

EDIT: Top to bottom, 19.25", possibly a bit shorter, I couldn't get a straight shot from top to bottom, it was deflected slightly.

 

[kert0307]

I can measure the superlift- you want from the top of the knuckle to the bottom where the ball joint goes through I suppose?

Yes, Ball joint mount to mount.

Thanks for the numbers. I'm curious to see if there's really much difference between the two...