Farmerjohn
New Member
- Joined
- August 17, 2017
- Messages
- 5
- Reaction score
- 0
- City, State
- Pennsylvania
- Year, Model & Trim Level
- 1996 XLT
I been looking everywhere on the web,searched here but can't come up with a definite answer.
What I need to know is what I need to do to swap out a bad 4r44e out of my '96 Exploder with a '95 4r55e that I have from my totaled STX Ranger.
From the searching all I have come up with is that the 44 is 440ftlb capacity and the 55 is 550,but I can not find if I need to swap wiring harnesses,computers,or what else.I can't remember were all I've looked or what pages it was on that said this or that,but some say it's a direct swap and other say it isn't....
I have the complete drivetrain from the Ranger along with all the wiring as I was going to do a BII with a Ranger body but truck got totaled in an accident.
What I need to know is what I need to do to swap out a bad 4r44e out of my '96 Exploder with a '95 4r55e that I have from my totaled STX Ranger.
From the searching all I have come up with is that the 44 is 440ftlb capacity and the 55 is 550,but I can not find if I need to swap wiring harnesses,computers,or what else.I can't remember were all I've looked or what pages it was on that said this or that,but some say it's a direct swap and other say it isn't....

I have the complete drivetrain from the Ranger along with all the wiring as I was going to do a BII with a Ranger body but truck got totaled in an accident.