mrjones98e
Well-Known Member
- Joined
- November 9, 1999
- Messages
- 130
- Reaction score
- 0
My question is I got all my stuff to do better torsion bars and extended sway bar links and the sticker on my door was wrong it said I had d code bars jacked up the front this morning and I already had b bars and long sway bar links. My question is if I put spacers on my sway bars would that hurt anything because my front end is a little lower than my back end and I want to even it out. the torsion bars and stuff are all maxed out , or could I just go get longer bushings just fronm the parts store. I am getting a body lift put on this weekend maybe if we can figure out how to move a frame mounted brush gaurd up.
------------------
Ryan Jones
98 eddie baurer 4x4
2 inch lift
32x11.50 buckshots
manik brush gaurd and go rhino tail light gaurds
hella black majik driving light
jbl door speakers and kicker fifteen
92 explorer with two inches of lift
30x9.50 mud kings
mrjones98e@hotmail.com
------------------
Ryan Jones
98 eddie baurer 4x4
2 inch lift
32x11.50 buckshots
manik brush gaurd and go rhino tail light gaurds
hella black majik driving light
jbl door speakers and kicker fifteen
92 explorer with two inches of lift
30x9.50 mud kings
mrjones98e@hotmail.com
