Transfercase swap

[Buckshot_1]

I have a push button to activate my 4x4, has
anyone changed the transfercase for a shifter? If so is this a hard job?

 

[megillet]

If you stay with the BW 13-54 manual, it is a simple bolt in installation. This assumes you have a manual tranny (in which case there is already a hole cutout in your floor for the extra lever, it just has a plate over it). Also, you will need to get a different shift boot assembly to accomodate your extra lever. Personally, if it ain't broke, don't fix it, and save your money towards an Atlas II (that's what I am doing Dead Link Removed). Just my opinion.

------------------
1992 Explorer XL
4.0 L V6 5 Speed Manual

 

[DCider]

How much it the Atlas II???

------------------
David Cider
'92 Explorer XLT 4x4 4.0L 4Dr 4...

Current Mods:
Hi flo cat and muffler, KKM Air intake, SuperChip, Magnacor wires and AutoLite Double Platnum plugs

Pending Mods:
JBA headers, 4" Suspension Lift, Tires & Wheels

 

[Andy97XLT]

Will the Atlas II fit my 97 with the 4 spd auto trans with OD? I don't have the full console so I got room on the floor for the shifters...

------------------
Happy Wheelin,

Andy Statland
'97 XLT 4.0L OHV 4Dr 4x4
Warrior Twist in the works

 

[NoBoundaries]

Hey Andy:
If you do/can end up getting the atlas, I'd be happy to take your old t-case off your hands. I'm sure this would be a project you will undertake later, but I would be more than happy. I take it you have the 4wd Auto, 4wd high, and 4wd low settings? Let me know what you end up doing!

------------------
Tim Y.
1996 Explorer XLT
4.0L OHV 4x4