jason62371
Member
- Joined
- December 27, 2012
- Messages
- 12
- Reaction score
- 0
- City, State
- Alabama usa
- Year, Model & Trim Level
- 97 ford explorer
97 ford explorer control track 4x4 auto 4x4 4.0
So so yesterday I went and gave it a little gas at 30 mph and it downshifted and went to about 5 gs then revved up when it goes to shift.1 mile down the road it starts having shifting problems.i don't drive much so I figured I would run it for a sec.ok when it was in drive it did nothing but rev it.when I put it in 123 it was not slipping.i put it in reverse it revved up and be barely moved.the tranny was rebuilt a year ago.fluid is good.ok so I get home put it in reverse let it move it self back down the driveway.i put it in drive and nothing then 1st gear still nothing.i get mad and hit the gas hard and then it jerked and started working like normal again.i pulled my boat to the lake that night and today it runs fine.what does that sound like a pressure problem? I thought I blew a seal.the clutches and ect are good.
So so yesterday I went and gave it a little gas at 30 mph and it downshifted and went to about 5 gs then revved up when it goes to shift.1 mile down the road it starts having shifting problems.i don't drive much so I figured I would run it for a sec.ok when it was in drive it did nothing but rev it.when I put it in 123 it was not slipping.i put it in reverse it revved up and be barely moved.the tranny was rebuilt a year ago.fluid is good.ok so I get home put it in reverse let it move it self back down the driveway.i put it in drive and nothing then 1st gear still nothing.i get mad and hit the gas hard and then it jerked and started working like normal again.i pulled my boat to the lake that night and today it runs fine.what does that sound like a pressure problem? I thought I blew a seal.the clutches and ect are good.
