LS431o28
Member
- Joined
- August 28, 2000
- Messages
- 48
- Reaction score
- 0
- City, State
- Clearwater, Fl
- Year, Model & Trim Level
- 91 Explorer XLT 4x4
Ok my transmission just started slipping and it only does it when I put it in gear forward or reverse. then when I get to a light and stop its starting to slip out of gear, when I give it gas it pops back into gear. So I adjusted the linkage. no go. then I changed the filter and the oil hoping that would solve it. But gues what its been neither so the more and more i mess with it the closer I get to the awful words of "repair shop". does anyone have any ideas as to what it might be. besides the awful words.
Oh Ive watched my rpms to make sure there not to low and they are at the same as they have always been around 600 - 700.
Thanks anyone
also if it is some the repair shop has to do does anyone have a rough idea of what i might be looking at as far as a price.
[Edited by LS431o28 on 11-20-2000 at 02:25 PM]
Oh Ive watched my rpms to make sure there not to low and they are at the same as they have always been around 600 - 700.
Thanks anyone
also if it is some the repair shop has to do does anyone have a rough idea of what i might be looking at as far as a price.
[Edited by LS431o28 on 11-20-2000 at 02:25 PM]