trimming question

[CaptainCream]

I'm about to install my shackles on my 2wd sport X and then do a TT so I can fit my 32's in. I'm anticipating some trimming, but what exactly will I be trimming? And what tool will I need to do the trimming? Thanks

 

[Doug]

You'll be trimming where ever you rub and you'll be using 2 of my favorite tools to fix the rubbing problem, A sawzall and possibly a big hammer.

 

[CaptainCream]

Shoot, I don't have a sawzall with me. Is there anything else I could use?

 

[Alec]

I use a 4" grinder instead of a sawzall. Works well.

 

[Digger196]

i did the same as Alec!

 

[ExplSport02]

Lets see some pics when your done!

 

[Rx4phun]

could use a hack saw. I am going to be doing some serious cutting soon. Not just enough or just barely enough, after I am done i will be able to take out the stupid tt and shackles and run 33s

 

[CaptainCream]

Well I had to go with 31's but there was still some rubbin and all I have is a hacksaw so that will have to do. I'll try to get some pics next week. Thanks for all your advice everyone.

 

[Redrig]

i used a hacksaw also. take your time and you can hardly tell you trimmed. good luck