V8 conversion in a '95

[sn1522]

I've got a 95 explorer and want to put a 5.0 in it. Do I just need the motor mounts and exhaust manifolds off a 96 and newer or possibly what else? and will the AOD fit with my transfer case or do I need a new one of those too??

 

[Jason_25]

AA makes an adapter to fit the V6 transfer cases already so that shouldn't be a problem. But I highly recommend you swap to the manual TC just to be safe. Also, keep in mind that 96 is OBD II and has different wiring than your 95 has.

 

[sn1522]

what is OBD II? The motor I have is not out of a '96 it is out of a late 80's lincoln 5.0 HO. Also would I need for the wiring harness. do they make an adapter for this type of conversion?

 

[asp84]

You need to start by getting a Helms Manual for your explorer. Since you have an OBDII and Gem computer system, you need to see if any computer inputs need to be fulfilled. Basically, what I am saying is, Does your vehicle need input from the engine Computer to make the explorer electronic functions work proprely. The wiring situation is a little bit "sticky" in your situation. For example on 91-94 explorers, the explorer body harness will work properly w/out any input from the engine.

Also, I am not talking about the obvious; oil, temp, tach, etc. I spent 3 months researching and planning my wiring.

GET HELMS MANUAL!!!