Valve Body Torque sequence

[peties3]

Before you all say: "Use the search function" Been there and done that.
Where would I find the torque sequence and torque specs on the A4LD tranny in my 94 EX?

I would like to drop the VB and check it out while I have the pan and filter off.

Thanks in advance.
Mark

 

[BillJ]

I could not find the torque sequence either on this site.

I would suggest to get a manual for your transmission.

http://www.bulkpart.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=2&Category_Code=A4LDmanuals

 

[Glacier991]

Post number 57 in this thread may answer your question. The torque value by the way is 90 inch lbs.

http://www.explorerforum.com/forums/showthread.php?t=113354&page=3&pp=20

 

[peties3]

Wow, missed that the 1st. and 2nd. time through~~~

Thanks Glacier!!!!!

Got a related question though, I checked the ohm reading on the 2 soleniods and the front one was 51 ohms and the other one was 26 ohms. On my spare VB, the both checked out at 28 ohms. Should I be concerned with this????

Need to know asap.

Thanks!!!

 

[Glacier991]

TCC should be 26-40 ohms.

 

[peties3]

So what does it mean if there is more resistance?
I assume that the only way to change it is to drop the VB.