JTX
Explorer Addict
- Joined
- April 24, 2003
- Messages
- 2,435
- Reaction score
- 6
- City, State
- New Mexico
- Year, Model & Trim Level
- 94 xlt
I swapped a 98 5.0l into a 97 2wd 5.0l, I've almost got everything back together but I am having a weird ignition issue that I can't seem to trouble shoot. When I turn the key to "run" the starter turns, it will continue to turn until I turn the ignition to off.
I've checked the S cable and it is hot all the time. That tells me the solenoid and starter are fine.
My problem is I don't know where to start, is it the TRS, PCM, or Ignition switch. The switch was fine pre swap. Is the TRS the same on the 2wd transmission and 4wd transmission? Same for the PCM. I did not switch the PCM or the harness when I put the new motor/trans in.
Thanks in advance.
I've checked the S cable and it is hot all the time. That tells me the solenoid and starter are fine.
My problem is I don't know where to start, is it the TRS, PCM, or Ignition switch. The switch was fine pre swap. Is the TRS the same on the 2wd transmission and 4wd transmission? Same for the PCM. I did not switch the PCM or the harness when I put the new motor/trans in.
Thanks in advance.