What oring/sleeve for 4.0 OHV injectors? | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

What oring/sleeve for 4.0 OHV injectors?

Post number 2 has been selected as best answered.

freak

Well-Known Member
Joined
November 17, 2007
Messages
230
Reaction score
97
Location
Northwest Ohio
City, State
Pemberville
Year, Model & Trim Level
2000, Explorer XLS
I replaced all the injector orings on my 2000 4.0 OHV quite some time ago and I'm about to do it again. I cannot remember what I used. I see sleeves and orings listed at rockauto. It has stock injectors. What does it use?
 






just O rings, the SOHC engine has the plastic injector "seats" the OHV just uses O rings top and bottom
You can buy them aynwhere
 












Grab up one of these paint can openers ...free at paint counter at Home Depot ...likely Lowes too...
Works like a dream for loosening up the annoying clips without breaking them.... tug up one side a bit then move to other side to pop all the way off.....little hook on tool is perfect.
Paint Can Opener-1.jpg
 






Back
Top