What wheels will fit???

[86caprirs]

92 Xplorer 4x4. What wheels will fit on them from other year Explorers and rangers???I have seen a Bronco II with sport trac rims and tires.

 

[section525]

http://www.explorerforum.com/forums/showthread.php?t=145404

 

[86caprirs]

Well that did not help.Do all years of Explorers/Rangers fit?????

 

[have2goski]

the 1st and 2nd gens should be pretty close. the 3rd gens are a little off but you could run them if you wanted to, I did.

You will have to cut holes in the center caps if you don't get the ranger caps with the holes already there. not really a big deal if you use a hole saw.

 

[86caprirs]

Now thats the answer I am looking for. Thanks have2goski!!

 

[have2goski]

just make sure you do a little figuring on a set of wheels if you are going to buy them. I made fairly general statements based on the experience I have had. There are alot of parts out there and some of them might be different than what i have seen.

I seem to remember hearing 3rd gen rims come with 2 different offsets. one is like 19mm and the other i think is 44mm. obviously there is a big difference there. it is always best to know what you have now and what is different about the wheels you are thiking about purchasing.

the wheels i have (off a 3rd gen 4-dr explorer) sit about 1/2" closer in (naked eye guess) than the stock ones i had. I am comfortable with the setup and have been running it for awhile w/o any trouble

 

[86caprirs]

ok. so stick with the second gen then?????They had some good wheels there too.