wheel opinion

[tkd91]

Which do you think will look best/any issuse you think might come up with them? Is 9" too wide/will rub with the rim specs? Stock height or lifted or lowered?

http://www.latemodelrestoration.com/item/SVE-1007AAA/1994-04-Wheel-Sve-Anthracite-5-Lug-17X9

http://www.latemodelrestoration.com/item/LRS-1007UAS/1994-04-Mustang-Silver-Fr500-Wheel-17X9

http://www.latemodelrestoration.com/item/LRS-1007BP/1994-04-Mustang-Silver-Cobra-R-Wheel-17X9

http://www.latemodelrestoration.com/item/SVE-1007DA/1994-04-Mustang-Silver-SVE-Drift-18X9

 

[Wills05xlt4x4]

Which do you think will look best/any issuse you think might come up with them? Is 9" too wide/will rub with the rim specs? Stock height or lifted or lowered?

http://www.latemodelrestoration.com/item/SVE-1007AAA/1994-04-Wheel-Sve-Anthracite-5-Lug-17X9

http://www.latemodelrestoration.com/item/LRS-1007UAS/1994-04-Mustang-Silver-Fr500-Wheel-17X9

http://www.latemodelrestoration.com/item/LRS-1007BP/1994-04-Mustang-Silver-Cobra-R-Wheel-17X9

http://www.latemodelrestoration.com/item/SVE-1007DA/1994-04-Mustang-Silver-SVE-Drift-18X9

I've seen a few running mustang wheels on here esp cobra.. they'll be fine, though my bet is you may need a hubcentric wheel spacer...

 

[Kazer]

I run cobra rs with about 2 centimeters of clearance between the rim and steering knuckle. Rim specs and tire size are in my signature

 

[tkd91]

I have a set of cobra R's that are 17"x9", but they are a four lug version. I plan on using them for my next fox build. They wouldn't fit of course, plus I have to get them repowder coated. Kazer, if you wouldn't mind. Could you snap a few pics if possible to see how close? Thank you for your info guys.

 

[Kazer]

yeah ill get a few pics for ya tomorrow afternoon

 

[Kazer]

its a tight fit between the wheel weights and kunckle...can't even get my finger between them

i'd say that 6" is the absolute maximum backspacing you can run on a third gen

 

[tkd91]

Thank you for the shots. lol...That is cutting it close, but at least we know we can.