Which Amp?

[Rob2000XLT]

What amp would you recommend for 10 small enclosures subs that can handle about 150 rms? A Kenwood? US Acoustics? RF? Sony?
Just wondered what you guys recommended?
Thanks,
Rob

 

[leenjen]

how many ohms are the subs? are they dvc or svc?

i need to know to determine what high current amp would work best.

 

[leenjen]

if they are 4-ohm svc and you bridge them to 1.6-ohms mono
then i recommend the Audiobahn A2150HCX, you could try the A2200HCX but it might be too much power. good luck, let us know how it sounds.

btw.. what subs are you using?

 

[mrsteve]

How many subs are we talking about here: 10 subs or 1 10" sub??

Steve

 

[Rob2000XLT]

Sorry about the confusion:
Trying to power 2 10" inch subs. These subs will handle about 150 watts per sub. Oh and they are SVC, but how would that affect it? Don't really understand that DVC or SVC thing.
Thanks,
Rob

 

[leenjen]

oh, i thought you meant 10 subs

 

[Rob2000XLT]

So what would you guys recommend?

 

[mrsteve]

You are gonna need to find an amp that puts out 300 watts mono @ 2ohms.

 

[leenjen]

really, it depends on how much you are willing to spend.
since you have two 10"svc 150watt subs, you probably aren't going for top of the line. Kenwood or Rockford fosgate will do fine.
just make sure they can handle 2 ohms mono if you bridge the subs. if you hook them up in stereo, you'll be fine no matter what amp it is.