Which make of clutch master cylinder to buy?

[clackkent]

I've decided to replace the clutch master cyl on my 95 Sport. Options are Duralast ($46), Brakeware ($46), Sachs ($66) or Luk ($88). Are any of these any good? Any recommendations? Many thanks at all!

 

[RangerX]

My accumulated knowledge from reading all the clutch and slave threads says to get one from a Ford dealer.
When I did mine, I bought the whole LUK package (clutch and slave).

 

[clackkent]

Well I got the Duralast one and it works just fine. After bench bleeding, installed OK. Bled the clutch slave (what a pain) and now the 5 spd is transformed and fully operational again.

 

[RangerX]

Glad it's running again. The issue between brands is not whether they work, but how long they work.

 

[davelc32]

What about the prefilled master/slave cyl kits? Shouldn't need to bleed-right or wrong?

 

[D9H 90V]

What about the prefilled master/slave cyl kits? Shouldn't need to bleed-right or wrong?

just wanted to bump this one to see if anyone has an answer for this question, thanks

 

[bobflood]

Still need to bleed. It's almost impossible to remove the lines from old cyl and install on new cyl w/o introducing air into system.