will 31x10.50's fit?

[Turner55]

hey my brother has some 31x10.50 bfg AT KO's on his tacoma and is thinkin of gettin a lift...will i be able to fit these on my stock rims w/o a lift or anything? i know some people on the board have trouble with 31's and some dont...thanks for the help

 

[Stephen S]

Well, chances are they will fit just fine with no lift. But it seems that you are right, a few have had a little trouble with 31's. Your best bet would be to go to a tire shot and have them test mount one for you on the front. Put it back on the ground and see if it rubs. I'm pretty sure you won't have any trouble.

 

[914x4sport]

The sports seems to handle them pretty well...If anything your rub will just be the plastic front inner fenders..I had 31's on my 91 for a while stock with no problems...If you do a 2" Body lift youll be set...

 

[fordkrazy]

mine wouldnt rub at all if i didnt have that damn dent in the drivers fender.

 

[GTExplorerMan]

As far as I know, you should be just fine with the 31's on stock rims. I hope it works out okay for ya. Let me know...

 

[ok89]

These won't rub on a 1998 XLT will they?

 

[jimbo74]

turner 55 you will be fine maybe inner plastic trimming

ok89 you may need torsion twist/shackles...but you probably wont have a problem with minimal plastic trimming


My 31s on stockers with only plastic triming