bad.shimmy
Active Member
- Joined
- November 28, 2007
- Messages
- 58
- Reaction score
- 2
- City, State
- auburn wa
- Year, Model & Trim Level
- 91 eddie bauer
Hello all
Got a 91 x and I've found I'm getting code 226 and a 113 and 211 continuous code.
I've also noticed that one of my wiring harnesses near the alternator have been spliced all to hell. There are two round connectors on the alternator bracket and the one thats spliced is the small 6 wire harness.
This harness has a red wire with I think blue stripe that goes nowhere.
I can't find any 91 x's in the junkyards nearby.
Was wondering if any kind heart out there could take look at this harness and let me know where that red wire goes.
Not sure what splicing was done but it appears to be causing rough high idle loss of power excessive gas usage.
Thanks in advance all.
I'll grab a picture of the connector when it vet light tomorrrow
Cheers
J
Got a 91 x and I've found I'm getting code 226 and a 113 and 211 continuous code.
I've also noticed that one of my wiring harnesses near the alternator have been spliced all to hell. There are two round connectors on the alternator bracket and the one thats spliced is the small 6 wire harness.
This harness has a red wire with I think blue stripe that goes nowhere.
I can't find any 91 x's in the junkyards nearby.
Was wondering if any kind heart out there could take look at this harness and let me know where that red wire goes.
Not sure what splicing was done but it appears to be causing rough high idle loss of power excessive gas usage.
Thanks in advance all.
I'll grab a picture of the connector when it vet light tomorrrow
Cheers
J