vincekim9
Member
- Joined
- November 6, 2005
- Messages
- 32
- Reaction score
- 0
- City, State
- PERTH, WA
- Year, Model & Trim Level
- '98 XLT
Hi all, I tried change primary chain tensioner etc...but i could not remove crankshaft bolt...I did many things and spent lots of time. will do it again soon at my friends workshop with professional tools. I just install all of parts again.....feel sad....
i have trouble with engine won't start now. after install all of parts and first start was really good, sound like a new car...after 1 minute of idle and turn engine off for fill water in radiator. but won't start engine after fill water up in radiator.....I can hear starter motor and crank sound and electronic things are fine.....I do not understand what was wrong....water?? must fill coolant in radiator?
possibly
1. wrong engine timing?(i spin crankshaft pulley couple of times counter clockwise and move back and mark in pulley, but i am not sure same time spin back to clockwise)
2. fuel pump?( i could not hear huming...when ignition on)
or any problem???? please advise me....
i have trouble with engine won't start now. after install all of parts and first start was really good, sound like a new car...after 1 minute of idle and turn engine off for fill water in radiator. but won't start engine after fill water up in radiator.....I can hear starter motor and crank sound and electronic things are fine.....I do not understand what was wrong....water?? must fill coolant in radiator?
possibly
1. wrong engine timing?(i spin crankshaft pulley couple of times counter clockwise and move back and mark in pulley, but i am not sure same time spin back to clockwise)
2. fuel pump?( i could not hear huming...when ignition on)
or any problem???? please advise me....
