MBM
Member
- Joined
- July 16, 2010
- Messages
- 17
- Reaction score
- 0
- City, State
- NJ
- Year, Model & Trim Level
- 2002 XLT
I have an early model 02 explorer and am having issues with the CC. When I set the CC the green light comes on and stays on but occaisionally it will not hold the set speed and it drops off. Two other times it did the opposite; it got stuck on and I had to apply some pressure on the brake and then the safety/pressure switch disabled it. My ABS light doesnt flash and the brake lights work ok.. Seems like it could be the servo or actuator? Any thoughts? Thank you