steventadams
Well-Known Member
- Joined
- February 28, 2007
- Messages
- 965
- Reaction score
- 0
- City, State
- New Jersey
- Year, Model & Trim Level
- 2001 Sport
Okay so I'm in a bit of a pickle.
A few weeks ago my Compass/Dome light went out. My right rear blinker then went out. Then my left rear blinker went out. They all share a common ground according to my Haynes Manual. The front blinkers and indicators on the dash work fine. I did continuity checks on the MFS and it's still good and the rest of the MFS works fine.
The fuses all lit up my test light except a few that didn't light up on either side so I assume those are spares. Does anyone have a fuse box diagram or list? Haynes doesn't have one.
I don't have power to either rear blinker so I've ruled out a bad ground. The Haynes Manual shows the blinkers share a pigtail somewhere upstream of the lights but I have no idea where it is.
Does anyone have any sort of map or wiring diagram that shows physically where junctions and wiring harnesses are in this dang vehicle? I need to get these things working.
Any ideas? Thanks.
Edit: I also did continuity checks on the bulb sockets, they are good. The bulbs themselves are new as well. The high mount brake light works fine also. It's just those two bulbs that don't have power.
A few weeks ago my Compass/Dome light went out. My right rear blinker then went out. Then my left rear blinker went out. They all share a common ground according to my Haynes Manual. The front blinkers and indicators on the dash work fine. I did continuity checks on the MFS and it's still good and the rest of the MFS works fine.
The fuses all lit up my test light except a few that didn't light up on either side so I assume those are spares. Does anyone have a fuse box diagram or list? Haynes doesn't have one.
I don't have power to either rear blinker so I've ruled out a bad ground. The Haynes Manual shows the blinkers share a pigtail somewhere upstream of the lights but I have no idea where it is.
Does anyone have any sort of map or wiring diagram that shows physically where junctions and wiring harnesses are in this dang vehicle? I need to get these things working.
Any ideas? Thanks.
Edit: I also did continuity checks on the bulb sockets, they are good. The bulbs themselves are new as well. The high mount brake light works fine also. It's just those two bulbs that don't have power.