tool | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

tool

  1. B

    04 fuel filter

    So on the second attempt to change the fuel filter( tried last week an gave up so I could do more reading) . I bought a plastic filter removal tool for 5/16 line, too small ! Play with that for 20 minuets no luck So I cut another sharpie cover an went back at it ( my first attempt was a sharpie...
  2. M

    Fuel Filter pissin' me off....

    So.... I go to change my fuel filter.. Easy enough, right? WRONG. This is what my filter line looks like.... So.... How the heck, right? I got one of those "special removal tools" to make it easy... The freakin' tool doesn't fit between the filter and the push lock...
  3. D

    Tool Box in your ST?

    Greetings!! I have a 2004 ST. I have the factory hard tonneau cover. I would like to mount a tool box in the front of the bed, under the folding cover. It would be perfect if it had a gap at the bottom for longer, flatter cargo. I've built a shelf, and that kinda works with bins on it. I...
  4. Lisle 63400 strut remover tool.

    Lisle 63400 strut remover tool.

  5. Radio removal tool kit.

    Radio removal tool kit.

  6. Insert the tool, and pull on the pipe to disconnect.

    Insert the tool, and pull on the pipe to disconnect.

  7. Universal oil filter tool.

    Universal oil filter tool.

  8. 4 inch PVC plug converted into a 3.0L rear main seal installation tool.

    4 inch PVC plug converted into a 3.0L rear main seal installation tool.

  9. Completed air test tool.

    Completed air test tool.

  10. The caliper pin tool is pushing out the bolt.

    The caliper pin tool is pushing out the bolt.

  11. The caliper pin tool has a groove on the handle.

    The caliper pin tool has a groove on the handle.

  12. P

    Fuel injector cleaning

    Has anyone used a cleaner tool like this http://us.st12.yimg.com/us.st.yimg.com/I/sjdiscounttools_2041_81980120 How did it work? I know off car cleaning is the best but how well do these type of tools clean? There is instructions on the can of seafoam for injector cleaning tools like...
  13. Top view of the inner tube installation tool.

    Top view of the inner tube installation tool.

  14. Side view of the inner tube installation tool.

    Side view of the inner tube installation tool.

  15. A4LD valve body with a brake adjusting tool behind the stuck end plug.

    A4LD valve body with a brake adjusting tool behind the stuck end plug.

    I put this tool in this place to prevent the drill bit from going too far into the bore when the drill bit goes through the end plug.
  16. Small slap hammer pin & nail puller complete view.

    Small slap hammer pin & nail puller complete view.

    This slap hammer has a keyless chuck as a removable attachment. It could be used for pulling out nails from mouldings without leaving pry marks on the wood. Another use is for removing that subborn dowel pin on the bottom of a Ford transmission.
  17. Small slap hammer pin & nail break out view.

    Small slap hammer pin & nail break out view.

    This slap hammer has a keyless chuck as a removable attachment. It could be used for pulling out nails from mouldings without leaving pry marks on the wood. Another use is for removing that subborn dowel pin on the bottom of a Ford transmission.
  18. Complete pin and nail puller.

    Complete pin and nail puller.

    This slap hammer has a keyless chuck as a removable attachment. It could be used for pulling out nails from mouldings without leaving pry marks on the wood. Another use is for removing that subborn dowel pin on the bottom of a Ford transmission.
  19. Vice Grip Tool

    Vice Grip Tool

    Vice Grip tool for removing rounded off nuts/bolts.
Back
Top