vishal
New Member
- Joined
- December 12, 2008
- Messages
- 1
- Reaction score
- 0
- Year, Model & Trim Level
- 96 corolla EE 100
Hi,
I installed a GPS/GSM tracker on a Ford Ranger 2005.
And using the tracker, i would like to get the engine revolution.
The tracker has an analog input and CAN option(Can high and Can low) that can be connected to the outlet socket of the ECU of the vehicle .
I would like to know:
1. were i can connect the analog input of my tracker device on the vehicle to get the engine revolution (Voltage).
2. If case i am using the CAN option, where i need to connect it and what are the codes.
Kindly advise
I installed a GPS/GSM tracker on a Ford Ranger 2005.
And using the tracker, i would like to get the engine revolution.
The tracker has an analog input and CAN option(Can high and Can low) that can be connected to the outlet socket of the ECU of the vehicle .
I would like to know:
1. were i can connect the analog input of my tracker device on the vehicle to get the engine revolution (Voltage).
2. If case i am using the CAN option, where i need to connect it and what are the codes.
Kindly advise